•  
  •  
 

Corresponding Author

刘恺,男,博士,副教授.E-mail:kailiu30@csu.edu.cn

Abstract

Due to the frequent occurrence of building fires, the mechanical properties of concrete, as the most widely used construction material, are severely challenged under high temperatures. To explore the effect of granite manufactured sand content on the performance of ultra-high performance concrete (UHPC) after heating and cooling treatment, three types of UHPC specimens with different manufactured sand contents (0, 50%, and 100%) were prepared in this study. Then, the effects of manufactured sand content, heating temperature, and cooling regime on the P-wave velocity and uniaxial compressive strength of UHPC were obtained through experiments. The results indicate that the P-wave velocity and compressive strength of UHPC both increase slightly with the increase in manufactured sand content. When the specimen is heated from a room temperature of 25 ℃ to 300 ℃, the corresponding P-wave velocity and compressive strength decline gently. When the target temperature is raised to 600 ℃ and 900 ℃, the corresponding P-wave velocity and compressive strength decrease sharply. In addition, it is revealed by the investigation of cooling regimes that the decrease in P-wave velocity and compressive strength of the specimens under water cooling is greater than that under natural cooling, indicating that secondary damage to the specimens is caused by the thermal shock induced by water cooling.

Publication Date

6-27-2026

DOI

10.14048/j.issn.1671-2579.2026.03.009

First Page

73

Last Page

81

Submission Date

June 2026

Reference

[1]LIU K,WU C Q,LI X B,et al.The influences of cooling regimes on fire resistance of ultra-high performance concrete under static-dynamic coupled loads [J].Journal of Building Engineering,2021,44:103336.
[2]方驰,杨伟浩,任康,等.保水轻骨料对超高性能混凝土强度和自收缩的影响 [J].中外公路,2025,45(2):65-72.FANG Chi,YANG Weihao,REN Kang,et al.Effect of lightweight aggregate with water-holding capacity on strength and autogenous shrinkage of ultra-high performance concrete [J].Journal of China & Foreign Highway,2025,45(2):65-72.
[3]WANG D H,SHI C J,WU Z M,et al.A review on ultra high performance concrete:Part Ⅱ.Hydration,microstructure and properties [J].Construction and Building Materials,2015,96:368-377.
[4]黄赟,赵华,涂磊.钢板 ‒UHPC组合梁抗弯性能试验及有限元分析 [J].中外公路,2023,43(1):69-76.HUANG Yun,ZHAO Hua,TU Lei.Test and finite element analysis on flexural properties of steel plate ‒UHPC composite beam [J].Journal of China & Foreign Highway,2023,43(1):69-76.
[5]周腾,裴炳志,黄政宇,等.钢纤维掺量对 UHPC轴拉性能的影响 [J].中外公路,2022,42(5):120-124.ZHOU Teng,PEI Bingzhi,HUANG Zhengyu,et al.Influence of steel fiber content on UHPC axial tensile performance [J].Journal of China & Foreign Highway,2022,42(5):120-124.
[6]常诚,王绪富,王瑜,等.煅烧渣土对超高性能混凝土力学及收缩性能的影响 [J].中外公路,2026,46(1):63-70.CHANG Cheng,WANG Xufu,WANG Yu,et al.Effect of calcined construction spoil on mechanical and shrinkage properties of UHPC [J].Journal of China & Foreign Highway,2026,46(1):63-70.
[7]吴新印,胡方健,刘兆丰.预制装配式超高性能混凝土(UHPC )桥梁盖梁施工工艺研究 [J].中外公路,2022,42(2):138-141.WU Xinyin,HU Fangjian,LIU Zhaofeng.Construction technology research on prefabricated bridge bent cap made with ultra high performance concrete (UHPC ) [J].Journal of China & Foreign Highway,2022,42(2):138-141.
[8]龙屹宇,陈双庆,唐春燕,等.基于断裂力学的 UHPC加固 钢 桥 面 板 性 能 分 析 [J].中 外 公 路,2023,43(4):170-175.LONG Yiyu,CHEN Shuangqing,TANG Chunyan,et al.Performance analysis of steel bridge deck reinforced by UHPC based on fracture mechanics [J].Journal of China & Foreign Highway,2023,43(4):170-175.
[9]张欣,李瑜,刘勇.大跨度自锚式悬索桥钢 ‒UHPC轻型组合加劲梁构造设计研究 [J].中外公路,2023,43(4):147-152.ZHANG Xin,LI Yu,LIU Yong.Research on structural design of steel‒UHPC light composite beam of large-span self-anchored suspension bridge [J].Journal of China & Foreign Highway,2023,43(4):147-152.
[10]NAWY EG.Fundamentals of high-performance concrete[J].John Wiley & Sons,2001.
[11]王稷良,魏新院,于波.花岗岩机制砂特性对混凝土性能影响研究进展 [J].中外公路,2025,45(4):59-67.WANG Jiliang,WEI Xinyuan,YU Bo.Effect of granite machine-made sand properties on concrete performance[J].Journal of China & Foreign Highway,2025,45(4):59-67.
[12]葛进进,高小羽,陈佩圆,等.橡胶 ‒机制砂 UHPC压缩破坏特性及能量演化特征 [J].硅酸盐通报,2024,43(8):2806 -2816.GE Jinjin,GAO Xiaoyu,CHEN Peiyuan,et al.Compressive failure and energy evolution characteristics of rubber ‒ manufactured sand UHPC [J].Bulletin of the Chinese Ceramic Society,2024,43(8):2806 -2816.
[13]曾旺.混杂纤维对玄武岩机制砂超高性能混凝土性能影响研究 [D].抚州:东华理工大学,2023.ZENG Wang.Study on the influence of hybrid fiber on the performance of basalt machine-made sand ultra-high performance concrete [D].Fuzhou:East China Institute of Technology,2023.
[14]杨益伦,吴庆雄,陈智威,等.无配筋机制砂 UHPC井盖受力性能试验研究 [J].宁夏大学学报 (自然科学版 ),2023,44(4):328-338.YANG Yilun,WU Qingxiong,CHEN Zhiwei,et al.Experimental study on mechanical performance of machine-made sand UHPC manhole cover without reinforcement [J].Journal of Ningxia University (Natural Science Edition ),2023,44(4):328-338.
[15]SAKR K,EL-HAKIM E.Effect of high temperature or fire on heavy weight concrete properties [J].Cement and Concrete Research,2005,35(3):590-596.
[16]CHAN Y N,LUO X,SUN W.Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800 ℃[J].Cement and Concrete Research,2000,30(2):247-251.
[17]朋改非,牛旭婧,成铠.超高性能混凝土的火灾高温性能研究综述 [J].材料导报,2017,31(23):17-23.PENG Gaifei,NIU Xujing,CHENG Kai.Research on fire resistance of ultra-high-performance concrete:A review[J].Materials Review,2017,31(23):17-23.
[18]牛旭婧,乜颖,朋改非,等.养护制度对超高性能混凝土抗高温爆裂性能的影响 [J].硅酸盐学报,2020,48(8):1212 -1222.NIU Xujing,NIE Ying,PENG Gaifei,et al.Influence of curing regime on resistance of ultra-high performance concrete to explosive spalling under high temperature [J].Journal of the Chinese Ceramic Society,2020,48(8):1212 -1222.
[19]CHEN H J,YU Y L,TANG C W.Mechanical properties of ultra-high performance concrete before and after exposure to high temperatures [J].Materials,2020,13(3):770.
[20]韩长君,周海龙,王海龙.冲击荷载下高强混凝土动力特性 及 破 碎 特 征 研 究 [J].振 动 与 冲 击,2024,43(11):320-326.HAN Changjun,ZHOU Hailong,WANG Hailong.Dynamic characteristics and crushing features of high-strength concrete under impact load [J].Journal of Vibration and Shock,2024,43(11):320-326.
[21]SHEN W G,LIU Y,CAO L H,et al.Mixing design and microstructure of ultra high strength concrete with manufactured sand [J].Construction and Building Materials,2017,143:312-321.
[22]冯滔滔,蒋金洋,刘志勇,等.机制砂超高性能混凝土的冲击压缩力学性能 [J].硅酸盐学报,2020,48(8):1177 -1187.FENG Taotao,JIANG Jinyang,LIU Zhiyong,et al.Impact compression mechanical properties of ultra-high performance concrete with manufactured sand [J].Journal of the Chinese Ceramic Society,2020,48(8):1177 -1187.
[23]徐良,程华才,马子宸,等.机制砂岩性与级配对混凝土抗硫酸盐侵蚀性能的影响 [J].硅酸盐通报,2022,41(6):1973 -1980.XU Liang,CHENG Huacai,MA Zichen,et al.Effects of manufactured sand lithology and gradation on sulfate resistance of concrete [J].Bulletin of the Chinese Ceramic Society,2022,41(6):1973 -1980.[24]杨艳华,魏杰,冯小伟,等.机制砂特性对路面混凝土力学性能及微观形貌的影响研究 [J].公路,2024,69(3):71-79.YANG Yanhua,WEI Jie,FENG Xiaowei,et al.Study on influence of manufactured sand characteristics on mechanical properties and micro-morphology of pavement concrete [J].Highway,2024,69(3):71-79.
[25]王晓波,亢泽千,孔亚宁,等.母岩类型和岩性对混凝土骨料性能的影响 [J].混凝土,2023 (3):77-80,85.WANG Xiaobo,KANG Zeqian,KONG Yaning,et al.Concrete aggregate performance affected by the type and lithology of parent rock [J].Concrete,2023 (3):77-80,85.
[26]LIU K,WU C Q,LI X B,et al.Fire damaged ultra-high performance concrete (UHPC ) under coupled axial static and impact loading [J].Cement and Concrete Composites,2022,126:104340.
[27]朱茂金.钢纤维机制砂混凝土高温后力学性能及微观结构研究 [D].南宁:广西大学,2022.ZHU Maojin.Study on mechanical properties and microstructure of steel fiber manufactured sand concrete after high temperature [D].Nanning:Guangxi University,2022.
[28]MENDES A,SANJAYAN J G,COLLINS F.Effects of slag and cooling method on the progressive deterioration of concrete after exposure to elevated temperatures as in a fire event [J].Materials and Structures,2011,44(3):709-718.
[29]LIANG X W,WU C Q,YANG Y K,et al.Experimental study on ultra-high performance concrete with high fire resistance under simultaneous effect of elevated temperature and impact loading [J].Cement and Concrete Composite s,2019,98:29-38.

Share

COinS