Abstract
To calculate the target internal force of the static load test for precast beams, this paper discussed the problems such as the efficiency of static load tests, illustrated the basic principle of stress equivalence, and proposed a calculation method for determining the target internal force in the tests, with the method applied to the static load test of a precast box girder. The results show that the current regulations for load testing of highway bridges need further improvement in terms of the efficiency calculation of static load tests. Additionally, stress equivalence refers to the fact that the stress under the test load is the same as the stress under the most unfavorable stress state under a certain design load. The stress equivalence principle can be applied to the calculation of static load tests on precast beams. If there is a system transition during the subsequent construction of precast beams, the effect of the construction process on the stress of the precast beams should be considered.
Publication Date
8-18-2022
DOI
10.14048/j.issn.1671-2579.2022.04.025
First Page
139
Last Page
143
Submission Date
May 2025
Recommended Citation
Zhi, HE and Juanjuan, LI
(2022)
"Discussion on Calculation of Internal Force of Static Load Test for Bridge Precast Beam Based on Stress Equivalence,"
Journal of China & Foreign Highway: Vol. 42:
Iss.
4, Article 25.
DOI: 10.14048/j.issn.1671-2579.2022.04.025
Available at:
https://zwgl1980.csust.edu.cn/journal/vol42/iss4/25
Reference
[1] 王敬飞,吴文亮,李明汇.高速公路桥梁预制场硬化层再 利用技术研究[J].中外公路,2018,38(5):140-143. WANG Jingfei, WU Wenliang, LI Minghui, et al. Research on Reutilization Technology of Hardening Layer in Expressway Bridge Precast Yards [J]. Journal of Chinese and Foreign Highway, 2018, 38(5): 140-143. [2] 长 安 大 学.公 路 桥 梁 荷 载 试 验 规 程:JTG/TJ21-01— 2015[S].北京:人民交通出版社股份有限公司,2015. Chang’an University. Specifications for Load Testing of Highway Bridges: JTG/T J21-01-2015 [S]. Beijing: China Communications Press Co., Ltd., 2015. [3] 交通运输部公路科学研究院.公路桥梁承载能力检测评 定规程:JTG/TJ21—2011[S].北 京:人 民 交 通 出 版 社, 2011. Research Institute of Highway, Ministry of Transport. Specifications for Detection and Evaluation of Bearing Capacity of Highway Bridges: JTG/T J21-2011 [S]. Beijing: China Communications Press, 2011. [4] 刘旭政,桂奇琦,张翼飞,等.考虑桥面板现浇层刚度对连 续梁桥静动力 性 能 的 影 响 [J].中 外 公 路,2019,39(1): 64-67. LIU Xuzheng, GUI Qiqi, ZHANG Yifei, et al. Influence of Cast-in-Place Bridge Deck Stiffness on Static and Dynamic Performance of Continuous Girder Bridges [J]. Journal of Chinese and Foreign Highway, 2019, 39(1): 64-67. [5] 卢绍鸿,韩海影,林敏.预应力混凝土预制梁试验荷载的 计算方法[J].广东土木与建筑,2001(12):6-8. LU Shaohong, HAN Haiying, LIN Min. Calculation Method for Test Load of Prestressed Concrete Precast Beams [J]. Guangdong Architecture and Civil Engineering, 2001(12): 6-8.