Design and Key Technologies of Bridges with Long‑Cantilever Closed Steel Box Composite Girder

Authors

JI Jiandong, Shanxi Transportation Science Highway Survey and Design Institute Co ., Ltd., Taiyuan ,Shanxi 030032 , China ;Shanxi Transportation Survey & Design Institute Co .,Ltd., Taiyuan ,Shanxi 030032 , ChinaFollow
WANG Bin, Shanxi Transportation Science Highway Survey and Design Institute Co ., Ltd., Taiyuan ,Shanxi 030032 , ChinaFollow

Corresponding Author

王彬，男，硕士，高级工程师.E-mail：wbinbridge@163.com

Abstract

In order to meet the span requirements of bridges over the Yellow River and reduce the interference of temporary construction facilities on flood discharge from the Yellow River,the Linyi Yellow River Bridge was studied.The main bridge adopted a continuous long-cantilever closed steel box composite girder of (112 + 28 × 128 + 120) m and was divided into two parts,with the maximum length of the parts being 1 912 m.The steel box composite girder was constructed by incremental launching method without temporary piers,and the bridge deck was installed after the closed steel box girder was in place.The installation sequence of the bridge deck was from the positive bending moment area in the middle of the span to the negative bending moment area at the fulcrum.The research focused on three key technical issues:optimization measures of mechanical properties in the negative bending moment area of the composite girder,fatigue resistance design of diagonal braces,and optimization design of wind resistance of a 2.5 m-high acoustic barrier.The results show that the compression stress on the bottom plate of the steel box girder and the crack width of the bridge deck can be reduced by using the composite structure in the negative bending moment area.The optimization effect of externally tensioned prestressed steel bundles decreases gradually with the shrinkage and creep of concrete.The fatigue resistance of diagonal braces of square steel pipes with the same cross-sectional area is better than that of round steel pipes.The polygonal acoustic barrier can effectively suppress the vortex response of the main girder.

Publication Date

6-27-2024

DOI

10.14048/j.issn.1671-2579.2024.03.016

First Page

137

Last Page

144

Submission Date

February 2025

Recommended Citation

Jiandong, JI and Bin, WANG (2024) "Design and Key Technologies of Bridges with Long‑Cantilever Closed Steel Box Composite Girder," Journal of China & Foreign Highway: Vol. 44: Iss. 3, Article 16.
DOI: 10.14048/j.issn.1671-2579.2024.03.016
Available at: https://zwgl1980.csust.edu.cn/journal/vol44/iss3/16

Reference

[1]邵 长 宇 .九 堡 大 桥 组 合 结 构 桥 梁 的 技 术 构 思 与 特 色 [J].桥梁建设 ,2009 ,39(6):42-45.SHAO Changyu .Technical consideration and features of composite structure bridges of Jiubao bridge in Hangzhou[J].Bridge Construction ,2009 ,39(6):42-45.
[2]龚臻 ,李翠平 ,雷洛 .复杂艰险条件下钢混组合桥梁设计应用 [J].中外公路 ,2022 ,42(2):131-137.GONG Zhen ,LI Cuiping ,LEI Luo .Design and application of steel-concrete composited bridge under complex and difficult conditions [J].Journal of China & Foreign Highway ,2022 ,42(2):131-137.
[3]朱朝银 ,张贵明 ,徐自然 .南益高速公路南洞庭 (胜天 )大桥设计构思与创新技术 [J].中外公路 ,2020 ,40(6):162-165.ZHU Chaoyin ,ZHANG Guiming ,XU Ziran .Design concept and innovative technology of the South Dongting (Shengtian ) bridge on Nanyi expressway [J].Journal of China & Foreign Highway ,2020 ,40(6):162-165.
[4]刘钊 ,邢渊 ,贺志启 ,等.槽形钢梁 ‒预制混凝土桥面板组合箱梁设计研究 [J].桥梁建设 ,2016 ,46(6):35-39.LIU Zhao ,XING Yuan ,HE Zhiqi ,et al .Design and development of a composite girder with steel tub girders and precast concrete deck slabs [J].Bridge Construction ,2016 ,46(6):35-39.
[5]李聪 ,聂建国 ,周心怡 ,等.钢‒混凝土连续组合梁桥负弯矩区抗裂设计 [J].建筑结构学报 ,2022 ,43(3):172-178.LI Cong ,NIE Jianguo ,ZHOU Xinyi ,et al .Anti-cracking design for hogging moment regions of steel-concrete continuous composite beam bridges [J].Journal of Building Structures ,2022 ,43(3):172-178.
[6]陈军刚 ,王学勇 ,周洲 ,等.大跨钢 ‒混凝土组合箱梁无支架顶推技术与控制计算 [J].中外公路 ,2020 ,40(4):137-141.CHEN Jungang ,WANG Xueyong ,ZHOU Zhou ,et al .Support-free jacking technique and control calculation for long-span steel-concrete composited box girder [J].Journal of China & Foreign Highway ,2020 ,40(4):137-141.
[7]夏学军 .宽幅钢箱梁大跨高位顶推施工关键技术 [J].世界桥梁 ,2019 ,47(3):15-19.XIA Xuejun .Key construction techniques for long-span and high-position incremental launching of wide steel box girder [J].World Bridges ,2019 ,47(3):15-19.
[8]刘佳 .大跨度钢 ‒混凝土连续组合梁桥施工过程有限元分析 [D].武汉 :华中科技大学 ,2012 .LIU Jia .Finite element simulation analysis of long span continuous composite beam bridge in construction process[D].Wuhan :Huazhong University of Science and Technology ,2012 .
[9]杨凯 ,刘婉玥 ,周小伍 .基于美国规范的钢 ‒混组合梁桥设计方法分析与应用 [J].中外公路 ,2023 ,43(5):168-171.YANG Kai ,LIU Wanyue ,ZHOU Xiaowu .Analysis and application of design method of steel-concrete composited beam bridge based on American code [J].Journal of China & Foreign Highway ,2023 ,43(5):168-171.
[10]李杨 ,邢万里 ,丁井臻 ,等.钢‒混凝土双面组合作用连续 梁有限元分析与试验设计 [J].建筑结构 ,2020 ,50(17):84-90.LI Yang ,XING Wanli ,DING Jingzhen ,et al .Finite element analysis and experimental design of steel-concrete double-sided composite continuous beams [J].Building Structure ,2020 ,50(17):84-90.
[11]弓正 ,苏秀丽 ,许凯峰 ,等.底板混凝土对连续组合梁桥性能影响研究 [J].公路交通科技 ,2021 ,38(增刊 1):48-52.GONG Zheng ,SU Xiuli ,XU Kaifeng ,et al .Study on the influence of floor concrete on the performance of continuous composite beam bridge [J].Journal of Highway and Transportation Research and Development ,2021 ,38(sup 1):48-52.[12]王宇琪 ,贾艳敏 ,魏皓天 ,等.预应力连续钢梁负弯矩区受力性能分析 [J].中外公路 ,2019 ,39(4):71-76.WANG Yuqi ,JIA Yanmei ,WEI Haotian ,et al .Analysis of behavior of prestressed continuous steel beams under negative bending moment [J].Journal of China & Foreign Highway ,2019 ,39(4):71-76.
[13]卜建清 ,张吉仁 .钢‒混凝土组合梁疲劳性能试验研究进展[J].中外公路 ,2022 ,42(5):78-82.PU Jianqing ,ZHANG Jiren .Research progress on fatigue behavior of steel-concrete composite beams [J].Journal of China & Foreign Highway ,2022 ,42(5):78-82.
[14]马 帅 ,杨 力 .轮 载 模 型 对 钢 桥 疲 劳 损 伤 评 估 的 影 响 分 析[J].中外公路 ,2022 ,42(4):126-131.MA Shuai ,YANG Li .Effect of wheel load model on fatigue damage assessment of steel bridges [J].Journal of China & Foreign Highway ,2022 ,42(4):126-131.
[15]姜磊 ,刘永健 ,龙辛 ,等.基于热点应力法的矩形钢管混凝土 组 合 桁 梁 桥 节 点 疲 劳 评 估 [J].交 通 运 输 工 程 学 报 ,2020 ,20(6):104-116.JIANG Lei ,LIU Yongjian ,LONG Xin ,et al .Fatigue assessment of joints in concrete-filled rectangular hollow section composite truss bridges based on hot spot stress method [J].Journal of Traffic and Transportation Engineering ,2020 ,20(6):104-116.
[16]黄 鹤 ,秦 攀 .正 交 异 性 板 钢 桁 结 合 梁 焊 接 细 节 疲 劳 性 能分析 [J].中外公路 ,2022 ,42(3):109-114.HUANG He ,QIN Pan .Fatigue analysis of welded details of orthotropic deck steel truss composited beams [J].Journal of China & Foreign Highway ,2022 ,42(3):109-114.
[17]敬 大 德 ,苏 益 .桥 梁 气 动 外 形 改 变 对 大 跨 桁 梁 桥 抗 风 性能影响研究 [J].中外公路 ,2024 ,44(1):119-125.JING Dade ,SU Yi .Influence of aerodynamic shape change on wind resistance performance of large span truss bridge [J].Journal of China & Foreign Highway ,2024 ,44(1):119-125.
[18]曾广平 .大跨径悬索桥风场特征监测及其与振动加速度关联分析 [J].中外公路 ,2022 ,42(2):142-147.ZENG Guangping .Wind field characteristic monitoring of long-span suspension bridge and analysis on its correlation with vibration acceleration [J].Journal of China & Foreign Highway ,2022 ,42(2):142-147.
[19]方国强 ,杨鸥 .钢‒混组合梁抗风性能及抑振措施研究 [J].铁道科学与工程学报 ,2020 ,17(9):2303 -2310 .FANG Guoqiang ,YANG Ou .Vortex-induced vibration performance of steel-concrete composite girder and aerodynamic optimization measures [J].Journal of Railway Science and Engineering ,2020 ,17(9):2303 -2310 .